General AviationBusiness Aviation
> C-126 ELT (121.5/243.0/406 MHz)>  406 MHz ELT Accessories> Survival> Custom Remote Switches> Replacement Battery Packs
Commercial AviationMilitary Aviation
> C-126 ELT (121.5/243.0/406 MHz)>  406 MHz ELT Accessories> Survival> Custom Remote Switches> Replacement Battery Packs
Helicopter
leading ELT technology

406 MHz ELT Accessories

Artex offers accessories and tools for 406 MHz ELTs that are designed to make the operators, installers and fleet managers life easier allowing for efficient maintenance procedures and ELT re-programming for fleet operations.

ELT to NAV Interface, Main Assembly

P/N 453-6500 - The Artex ELT to NAV Interface is designed to be connected between the aircraft's Flight Management Computer (FMC) or GPS receiver and the 406 MHz series of ELTs (G406-4, C406-1, C406-2, C406-1 HM, C406-2 HM) to allow transmission of …

Full Product Detail

ELT to NAV Interface with install kit

P/N 455-6500 - ELT to NAV Interface with install kitThe Artex ELT to NAV Interface is designed to be connected between the aircraft's Flight Management Computer (FMC) or GPS receiver and the 406 MHz series of ELTs (G406-4, C406-1, C406-2, C406-1 HM, …

Full Product Detail

ELT Test Set - ETS

P/N 455-9100 - The ETS ELT Test Set is a rugged and waterproof handheld device to read the transmitted code of a 406 Mhz Cospas-Sarsat ELT. The beacon ID and all encoded data is displayed on the reader. The data is saved to a database, and is …

Full Product Detail

2-Wire ELT/RSWT Interface

Many of the existing TSO C91a installations with Joliet, Pointer and Narco 121.5 MHz ELTs utilize only 2 wires between the cockpit remote switch and the ELT. Other manufacturers of 121.5 MHz ELTs use 3 or 4 wires.  The Artex 2-Wire Remote Interface …

Full Product Detail

ME-183 Navigation Interface

The ME-183 Navigation Interface unit links GPS devices that ouput NMEA-0183 protocol with the Artex ME406 beacon.  In the event of ELT activation, the GPS location data is immediately sent to the ELT and included in to the beacon message being …

Full Product Detail

ME406 ELT Reprogramming Adapter

Artex ME406 Series ELTs are designed such that multiple protocols can be selected and changed in the field.  The ME406 ELT Reprogramming Adapter is a product support device used to reprogram ME406 ELTs from non-location (short message) protocols to …

Full Product Detail