Artex offers accessories and tools for 406 MHz ELTs that are designed to make the operators, installers and fleet managers life easier allowing for efficient maintenance procedures and ELT re-programming for fleet operations.

Dongle, DGL-1 P/N 455-4010 - The Artex DGL-1 programming dongle allows the operator to easily program aircraft 24-bit (Standard Message Protocol) address into a compatible ELT. Fleet operators will be able to transfer ELTs between aircraft in a very efficient and … Full Product Detail
Programmed PA for C406-N P/N 453-5078 - Programmed Programming Adapter for C406-N The Artex Programming Adapter PA is an optional accessory for the C406-N series of ELTs and will automatically reprogram a C406-N ELT overwriting previously stored data for efficient fleet … Full Product Detail
ELT to NAV Interface, Main Assembly P/N 453-6500 - The Artex ELT to NAV Interface is designed to be connected between the aircraft's Flight Management Computer (FMC) or GPS receiver and the 406 MHz series of ELTs (G406-4, C406-1, C406-2, C406-1 HM, C406-2 HM) to allow transmission of … Full Product Detail
ELT to NAV Interface with install kit P/N 455-6500 - ELT to NAV Interface with install kitThe Artex ELT to NAV Interface is designed to be connected between the aircraft's Flight Management Computer (FMC) or GPS receiver and the 406 MHz series of ELTs (G406-4, C406-1, C406-2, C406-1 HM, … Full Product Detail
ELT to NAV Interface -B (Boeing), Main Assembly P/N 453-6501 - The Artex ELT to NAV-B Interface is designed to be connected between the aircraft's Flight Management Computer (FMC) or GPS receiver and the B406-4 (Boeing) ELT to allow transmission of position data with the distress signal. Full Product Detail
ELT to NAV Interface-B (Boeing) with install kit P/N 455-6501 - ELT to NAV Interface-B (Boeing) with install kitThe Artex ELT to NAV-B Interface is designed to be connected between the aircraft's Flight Management Computer (FMC) or GPS receiver and the B406-4 (Boeing) ELT to allow transmission of … Full Product Detail
ELT Test Set - ETS P/N 455-9100 - The ETS ELT Test Set is a rugged and waterproof handheld device to read the transmitted code of a 406 Mhz Cospas-Sarsat ELT. The beacon ID and all encoded data is displayed on the reader. The data is saved to a database, and is … Full Product Detail
TPS Connector Removal Tool The TPC Connector Removal Tool helps to unplug even the most awkwardly located connectors to allow for quick ELT (C406-1, C406-2, C406-1 HM and C406-2 HM) removal for maintenance.To order this tool, please contact Trompeter Electronics through the … Full Product Detail
2-Wire ELT/RSWT Interface Many of the existing TSO C91a installations with Joliet, Pointer and Narco 121.5 MHz ELTs utilize only 2 wires between the cockpit remote switch and the ELT. Other manufacturers of 121.5 MHz ELTs use 3 or 4 wires. The Artex 2-Wire Remote Interface … Full Product Detail
ME-183 Navigation Interface The ME-183 Navigation Interface unit links GPS devices that ouput NMEA-0183 protocol with the Artex ME406 beacon. In the event of ELT activation, the GPS location data is immediately sent to the ELT and included in to the beacon message being … Full Product Detail
ME406 ELT Reprogramming Adapter Artex ME406 Series ELTs are designed such that multiple protocols can be selected and changed in the field. The ME406 ELT Reprogramming Adapter is a product support device used to reprogram ME406 ELTs from non-location (short message) protocols to … Full Product Detail